Welcome To Vestil Manufacturing Online!

Vestil Manufacturing Corporation is an industry leader in the manufacturing and distributing of industrial material handling equipment. We feature over 1,000 different product lines, many of which are in stock and ready for immediate shipment.

SEARCH FOR A PRODUCT OR KEYWORD
Enter a Model Number or Keyword
CONTACT INFO
  • Address: PO Box 507
    2999 North Wayne St
    Angola, Indiana 46703 USA
  • Phone: 1.260.665.7586
  • Email: info@vestil.com

Speed Bumps
SERIES: SB,SBA,SBG,SBHA

SB-48Help control drivers in dangerous, areas while protecting people and property. One person installation. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight, and chemicals. Feature dual 1"W x 3/4"H cable channels and includes hardware. Constructed of lightweight recycled plastic. Compression strength is 3,200 pounds per square inch. The concrete hardware kit includes bolts, anchors, and washers. Asphalt kit includes spikes and butyl tape. The HD asphalt kit includes anchors and bolts. The HD anchor should be epoxied (epoxy not included) into the ground and then the speed bump is secured to that anchor with a bolt. The glue down anchor plate kit includes anchor plates, T-nuts, bolts, and washers. Requires 2-3 ounces of either 2-part epoxy or heavy duty construction adhesive to the bottom of each anchor plate, which is not included.

SB-48Help control drivers in dangerous, areas while protecting people and property. One person installation. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight, and chemicals. Feature dual 1"W x 3/4"H cable channels and includes hardware. Constructed of lightweight recycled plastic. Compression strength is 3,200 pounds per square inch. The concrete hardware kit includes bolts, anchors, and washers. Asphalt kit includes spikes and butyl tape. The HD asphalt kit includes anchors and bolts. The HD anchor should be epoxied (epoxy not included) into the ground and then the speed bump is secured to that anchor with a bolt. The glue down anchor plate kit includes anchor plates, T-nuts, bolts, and washers. Requires 2-3 ounces of either 2-part epoxy or heavy duty construction adhesive to the bottom of each anchor plate, which is not included.

Additional Models In This Family


All measurements are approximate. Slight variations, tolerances or changes may occur at any time. Weights shown are approximate shipping weights.
The Search Box below is within the Model Chart for this Product Family (on this current page). Not an entire site search.

KEY: = Expand Model Details = Quickship item = Non-Returnable item = Approval Drawing Required = Non-Cancelable Item
= On Hold/Temporarily Unavailable = Approval Drawing = Testing Certificate = 360 Image Warranty
= Works w/ Skid Only = Flatbed Truck Required

If you did not find an expected Model or SKU # in the table, try the Options Section Below

SB-108
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5

SB-36
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SB-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBA-108
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5

SBA-36
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBA-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBD-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBD-72
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBDA-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBDA-72
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBDG-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBDG-72
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBDHA-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBDHA-72
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBG-108
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5

SBG-36
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBG-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3

SBHA-108
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5

SBHA-36
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4

SBHA-48
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
For More Details of the Option Click the Red Model Button
SB-108-AK SB-108-AK30 Days Limited WarrantyPlastic Speed Bump with 5 Holes Asphalt Hardware Kit 13 In. x 7 In. x 6 In. SilverTape Width (in.): 2
Tape Length (ft.): 18
5
SB-108-GDK SB-108-GDK30 Days Limited WarrantyPlastic Speed Bump with 5 Holes Glue Down Hardware Kit 9 In. x 5 In. x 4 In. SilverSteel Plates Quantity/Length x Width (in.): (5) 5 x 5
3/8 In. T-Nuts Quantity: 5
3
SB-36-AK SB-36-AK30 Days Limited WarrantyPlastic Speed Bump with 4 Holes Asphalt Hardware Kit 13 In. x 7 In. x 6 In. SilverTape Width (in.): 2
Tape Length (ft.): 12
4
SB-36-GDK SB-36-GDK30 Days Limited WarrantyPlastic Speed Bump with 4 Holes Glue Down Hardware Kit 9 In. x 5 In. x 4 In. SilverSteel Plates Quantity/Length x Width (in.): (4) 5 x 5
3/8 In. T-Nuts Quantity: 4
3
SB-48-AK SB-48-AK30 Days Limited WarrantyPlastic Speed Bump with 3 Holes Asphalt Hardware Kit 13 In. x 7 In. x 6 In. SilverTape Width (in.): 2
Tape Length (ft.): 8
4
SB-48-GDK SB-48-GDK30 Days Limited WarrantyPlastic Speed Bump with 3 Holes Glue Down Hardware Kit 9 In. x 5 In. x 4 In. SilverSteel Plates Quantity/Length x Width (in.): (3) 5 x 5
3/8 In. T-Nuts Quantity: 3
2
SB-HD-AK-4 SB-HD-AK-430 Days Limited WarrantySteel Heavy Duty Asphalt Anchor Kit SilverAnchor (qty.): 4
9
SBE-12 SBE-1230 Days Limited WarrantyPlastic End Caps for Standard Speed Bumps 12 In. x 10 In. x 2 In. YellowPackage Contents: Pair of end caps for standard speed bumps
ASTM Specifications:
9
SBS-1012 SBS-101230 Days Limited WarrantyAluminum Reflective Speed Bump Sign 1/8 In. x 11-3/4 In. x 9-3/4 In. WhiteMessage Category: Security
Placement Style: Wall Mountable
2

.

If you did not find an expected Model or SKU # in this table, try the Product Specifications Section Above

Speed Bumps PDF's will open in a new window when clicked.

Manuals


Survey Sheets

No Survey Sheets For This Product


Approval Drawings

Testing Certificates


SB-108

SB-108-AK

SB-108-GDK

SB-36

SB-36-AK

SB-36-GDK

SB-48

SB-48-AK

SB-48-GDK

SB-HD-AK-4

SBA-108

SBA-36

SBA-48

SBD-48

SBD-72

SBDA-48

SBDA-72

SBDG-48

SBDG-72

SBDHA-48

SBDHA-72

SBE-12

SBG-108

SBG-36

SBG-48

SBHA-108

SBHA-36

SBHA-48

SBS-1012

SDS Sheets

No SDS Sheets For This Product

Other PDF's

No "Other PDFs" For This Product...


Directory Links Of Available PDF's For All Products


Q: What is the spacing in between the mounting holes?

A: The spacing in between the mounting holes is 21-1/4".






Before placing an order, please confirm that the ship to company is able to receive shipments on the estimated delivery date

 
 
 

Speed Bumps

 
SB-48_A.jpg
 

SB-48Help control drivers in dangerous, areas while protecting people and property. One person installation. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight, and chemicals. Feature dual 1"W x 3/4"H cable channels and includes hardware. Constructed of lightweight recycled plastic. Compression strength is 3,200 pounds per square inch. The concrete hardware kit includes bolts, anchors, and washers. Asphalt kit includes spikes and butyl tape. The HD asphalt kit includes anchors and bolts. The HD anchor should be epoxied (epoxy not included) into the ground and then the speed bump is secured to that anchor with a bolt. The glue down anchor plate kit includes anchor plates, T-nuts, bolts, and washers. Requires 2-3 ounces of either 2-part epoxy or heavy duty construction adhesive to the bottom of each anchor plate, which is not included.

 

Model # Description Attributes Net Wt.
(lbs)
SB-108 SB-108Plastic Speed Bump Concrete Hardware 106 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
58
SB-36 SB-36Plastic Speed Bump Concrete Hardware 72 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
26
SB-48 SB-48Plastic Speed Bump Concrete Hardware 48 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
17
SBA-108 SBA-108Plastic Speed Bump Asphalt Hardware 106 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
54
SBA-36 SBA-36Plastic Speed Bump Asphalt Hardware 72 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
32
SBA-48 SBA-48Plastic Speed Bump Asphalt Hardware 48 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
42
SBD-48 SBD-48Plastic Speed Bump Concrete Hardware 48 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
29
SBD-72 SBD-72Plastic Speed Bump Concrete Hardware 72 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
40
SBDA-48 SBDA-48Plastic Speed Bump Asphalt Hardware 48 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
33
SBDA-72 SBDA-72Plastic Speed Bump Asphalt Hardware 72 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
45
SBDG-48 SBDG-48Plastic Speed Bump Glue Down Hardware 48 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
26
SBDG-72 SBDG-72Plastic Speed Bump Glue Down Hardware 72 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
40
SBDHA-48 SBDHA-48Plastic Heavy Duty Speed Bump Asphalt Hardware 48 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
29
SBDHA-72 SBDHA-72Plastic Heavy Duty Speed Bump Asphalt Hardware 72 In. x 12 In. x 2-1/4 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
43
SBG-108 SBG-108Plastic Speed Bump Glue Down Hardware 106 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
68
SBG-36 SBG-36Plastic Speed Bump Glue Down Hardware 72 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
17
SBG-48 SBG-48Plastic Speed Bump Glue Down Hardware 48 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
19
SBHA-108 SBHA-108Plastic Speed Bump Heavy Duty Asphalt Hardware 106 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
45
SBHA-36 SBHA-36Plastic Speed Bump Heavy Duty Asphalt Hardware 72 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
28
SBHA-48 SBHA-48Plastic Speed Bump Heavy Duty Asphalt Hardware 48 In. x 10 In. x 2 In. YellowCompression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
19

Options


.


Our Customer Service Associates Are Here To Assist You!
Call Vestil At 260-665-7586 Or info@vestil.com